Doing this at least once or twice a year is sure to maximize the life expectancy of your refrigeration appliances.

  • Smokeydope@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    3 hours ago

    Installing a soft starter to smooth out the huge momentary rush in power the compressor motor experiences as it starts up. Thats by far the most impactful thing you can do to increase fridge lifespan to the point fridge manufacturers factor it in rush current in planned obsolescence calculations.

    The problem is that soft starter kits are expensive and you need to be competent enough with electricity to wire it in.

    • crank0271@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      21 hours ago

      Is there a good way to see if the current filter is running less efficiently, or do you just change it every 6 - 12 months regardless?

      • Guy Dudeman@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        19 hours ago

        Every 6 months. But I slacked this year and didn’t change them out before summer. So I’m going to start fresh now, and then change at the beginning of summer, and then again next year around Thanksgiving.

      • Clay_pidgin@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        0
        ·
        20 hours ago

        I get the extra thicc accordion style and I replace them at the manufacturer-suggested 6 months. The duct cleaners told me it should be done every 4 months, but he also said our duct weren’t too bad and I hadn’t had it done in like 6 years, so…

          • Clay_pidgin@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 hours ago

            Oh really? What makes you say that? I can see some buildup of lint past the returns and vents, but of course I can’t see very far.

            • Coreidan@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              4 hours ago

              It’s a scam because as you just pointed out they can only clear the registers and can’t get very far into the ducts.

              In most houses ducts have a lot of twists and turns. Some times your ducts will split off from the heavy sheet metal ducts and go down correlated tubes, etc.

              It’s damned near impossible to clean the entire ducts and even trying could mean damaging a part of the duct you can’t even access.

              The duct cleaners will try to convince you that they can clean every nook and cranny of your hvac system.

              They clean like 20% of your ducts and call it good. It’s pointless.

              Save the money and clean your own registers with some soap and water. The ducts won’t get cleaned anyway.

      • itsgroundhogdayagain@lemmy.ml
        link
        fedilink
        arrow-up
        0
        ·
        edit-2
        21 hours ago

        You dont need the good ones. In fact, sometimes the good ones can damage your HVAC system. If you use 3M filters, use the red label, not the purple label.

          • itsgroundhogdayagain@lemmy.ml
            link
            fedilink
            arrow-up
            1
            ·
            21 hours ago

            What i was told by an HVAC guy who was at my house to fix an issue was those more expensive filters make the system work harder as the filters limit airflow and that additional workload can cause issues.

            • spicy pancake@lemmy.zip
              link
              fedilink
              English
              arrow-up
              0
              ·
              21 hours ago

              physics wise that makes sense but modern systems should* be designed taking into account the air resistance of their specified filters

              older or for any other reason more weak airflow systems probably do benefit from a less dense filter

              *lol “should” means so little these days

              • Coreidan@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                4 hours ago

                Nope. HVAC systems are not designed around filters. It’s the other way around. After market filters are designed around marketing and grabbing at your wallet, not caring about your hvac system.

                High density filters are going to reduce air flow and your blow motor will be working over time.

                Eventually you’ll wear your blower motor out and it will need to be replaced.

                The world is full of shitty products. The onus is on you to sort through it.

                • spicy pancake@lemmy.zip
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  edit-2
                  26 minutes ago

                  this also makes sense, hmm.

                  is the best bet to examine the blower specs and find a corresponding filter grade?

                  where’s that Alec guy when you need him…

                • spicy pancake@lemmy.zip
                  link
                  fedilink
                  English
                  arrow-up
                  0
                  ·
                  21 hours ago

                  I cannot because I’m just a goofball with a mild interest in home improvement

                  Wikipedia says HEPA filters became commercially available in the 1950s though so anything older than that I’d bet some beer money would benefit from a less dense filter

                  I wouldn’t think forced air heating systems that old are too common though tbh