The EMMC on my PC-TV finally broke down and I’d like to replace it with something that doesn’t run an OS or will predictably fail with a countdown. But dumb TVs are hard to come by and monitors come at a premium at that size. I want to run a PC (DP/HDMI) and an SBC (HDMI) with it. I also have an S2 satellite cable, but that’s secondary. I’d like to have ~43", 16:9, 4K but without an embedded smart-hub, ideally running of eeprom-firmware, or just anything independent of write-cycles. But I can’t find any good options online. Are there companies for this. Comments and recommendations welcome.
Edit: I’m EU, hence the DVB-S2 cable. Scepter would be great, but doesn’t run on EU power.
Edit: I’ve pretty much settled on a philips 439P1/00. I’ll give it another day, but it seems good. The PC over DP is my main focus and I can connect my own SBC for streaming. It lacks freesync but has adaptive sync and basic HDR. Being an office-monitor, it has no smarts and at ~600 bucks with consumer warranty and support it fits what I’m asking for well. Industry-signage wasn’t really an option.
Currently it’s nearly impossible to find good and big dumb TV, but as mencioned, it’s only smart conected to the internet. Instead of this conect it to an Satelite decoder and a Parabolic outside (not very expensive (<€100) and you have access to hundreds of channels from every country for free. and anonymous.
Are people aware that they can buy a smart TV and never conntect it to wi-fi and never plug in the ethernet? There is no risk if TV never gets an IP.
It’s possible a smart TV will use its wifi to connect to another device of the same brand on its own. I’d read an article about it a couple years ago.
If I’m reading about it, that means a company has been working on it, and frankly it makes sense. If I were in their shoes I’d look into making it happen. It’s pretty trivial to do when you think about it.
Not that I think it’s happening in the wild, just an idea to keep in mind.
Also, those devices are always capturing data. So if/when they ever connect, that data will get uploaded.
