Hello,

I had a working wireguard peer on my laptop, which I didn’t want anymore, so I decided to uninstall wireguard. All was well until I restarted the laptop and now I can’t access the internet anymore.

I think it’s because of some config left over from wireguard, but I’m not sure how to fix it.

Running pop os 22.04.

Any advice?

    • anytimesoon@feddit.ukOP
      1·
      2 days ago

      I did, but no response

      I changed to a different router and can at least ping that now, but still no internet

      • nanook@friendica.eskimo.com
        1·
        2 days ago

        @anytimesoon With that different router, now try a traceroute 1.1.1.1, if you get a response from the first hop, 192.168.1.1, then something is wrong with the NAT on the router or your cable service or fiber or whatever it is, is not working.

        • anytimesoon@feddit.ukOP
          1·
          2 days ago

          Unlikely to be something wrong with that, tbh. Everything else on that network has internet access. The issue is limited to the laptop

  • nanook@friendica.eskimo.com
    1·
    2 days ago

    This is what mine looks like for contrast:
    0.0.0.0 50.251.249.54 0.0.0.0 UG 0 0 0 bridge0
    50.251.249.48 0.0.0.0 255.255.255.248 U 0 0 0 bridge0
    192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0

    In my case, 50.251.249.54 is my gateway and .48 my broadcast. I am static routed so no NAT.

  • superkret@feddit.org
    1·
    2 days ago

    sudo traceroute 1.1.1.1

    can show you how far your connection request gets (whether it’s blocked by your pc, your router, or somewhere on the internet).
    You may have to install it first.

    sudo find /etc -name *wg*
    find ~ -name *wg*

    can help find left-over config files.